View shopping cart
0 Products  
0,00 €    

0save cart

View wish list
0 Products  

0add wishlist

Go to product comparison
0 Products  

0add compare

Workshop equipment

BS Ø 13

Sample image, your configuration may differ.

Description

  • Round ceramic
  • Self-adhesive on aluminium strip
  • Less effort required for seam preparation: The imprecise air gap dimensions are compensated for by wide ceramic recesses. This means less time is required for preparation and alignment on your part.
  • Higher deposition rates: Thanks to the weld pool backing, higher deposition rates are also possible using greater welding currents. This means that larger electrode diameters are possible with MMA welding, as is spatter-free welding in the spray arc when MIG/MAG welding.
  • Cost reduction thanks to minimised preparation and finishing work: The root pass does not need to be processed thanks to the use of the weld pool backing. This also means reduced welding times and less consumption of welding consumables.
  • High visual seam quality: Due to potentially higher welding currents, you can penetrate deeper into the root pass. This enables you to achieve very high root pass quality.
  • Forming effect: Thanks to the self-adhesive aluminium foil, a forming effect occurs on the underside of the seam. This eliminates the need for forming gas.

Technical data

Ø13 mm
Overall length per PU54 m
Length per strip600 mm
An error occurred
Successfully completed
current mapping: product