Tetrix 300 AC/DC Smart 2.0 puls 8P TM
The price shown includes the following components:
- AC/DC TIG welding machine, portable, modular, decentral, 8-pole connection socket
- Cooling unit with centrifugal pump,
- “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l
- Transport cart (four wheels) for moving a power source, cooling unit or a tool box and one shielding gas cylinder, assembled
- TIG welding torch, Up/Down, water-cooled, 4 m
- Workpiece lead with clamp, 350 A / 60 %, 50 mm²
- Gas hose, 2 m
- Pressure regulator with manometer, 15 l
- Mains plug, assembled,
Description
- Modular AC/DC TIG inverter welding machine, gas- or water-cooled
- TIG welding
- activArc – Precise, focussed arc with reduced heat input and deep penetration for optimum root fusion
- To find out more about our high-tech TIG arcs, please click on TIG-Process
- Electronic HF start
- TIG lift arc welding
- Features characteristics for EWM activArc and EWM spotArc at no extra charge
- Adjustable AC waveform, sine, trapezoidal, square current
- Adjustable AC frequency between 30 Hz and 300 Hz
- Adjustable AC balance
- TIG average value pulsing: the preset welding current is maintained at all times, so particularly suitable for welding as per welding procedure specification
- Adjustable pulse frequency and balance
- Non-latched/latched operation
- Reduced secondary current accessible using torch trigger
- Spot welding/tack function (spotArc/spotmatic)
- Adjustable up-slope and down-slope time
- MMA welding
- Adjustable hot start current and hot start time
- Adjustable Arcforce
- Antistick function
- Adjustable gas pre- and post-flow time
- AC electrode welding
- MMA average value pulsing
- Highlights
- Gas-cooled or optionally water-cooled with cool 41 U31 cooling unit
- Energy-saving thanks to high efficiency and standby function
- Connection capability for remote control and function torch
- Excellent torch cooling, resulting in cost savings on consumables due to high-performance centrifugal pump and 4-litre water tank (cool 41U31 cooling unit)
- Trolly 35.2-2, Trolly 55-5 and Trolly 55-6 trolleys available
- Optional network connectivity with ewm Xnet software via LAN or WiFi gateway
- PC interface for PC300 XQ software
Note
- See the diagram for possible transport systems:
9229
92404
42594
10187
10223
91636
6105
124396
8774
Welding site equipment
- Please choose all necessary components to complete your system here.
-
blueCool -10 5 lCoolant for water-cooled welding machines and cooling unitsnone
5 l 30,75 €*/36,59 €**
25 l 136,25 €*/162,14 €**
-
Trolly 55-5Transport cart (four wheels) for moving a power source, cooling unit or a tool box and one shielding gas cylindernone
assembled 497,00 €*/591,43 €**
disassembled 485,00 €*/577,15 €**
-
Trolly 35.2-2Transport cart (two rolls) for transporting a power source, a cooling unit and a gas cylindernone
Trolly 35.2-2 653,00 €*/777,07 €**
-
Trolly 54Transport cart (four wheels) for moving a power source, cooling unit or a tool box and one shielding gas cylindernone
Trolly 54 313,00 €*/372,47 €**
ON TG.02 MS TR.20/21 35,30 €*/42,01 €**
-
Trolly 55-6Trolleynone
A shielding gas cylinder 806,00 €*/959,14 €**
Two shielding gas cylinders 832,00 €*/990,08 €**
-
TIG 260 GRIP WD 8P U/D 4mWater-cooled TIG welding torch Setting of welding current, in case of Synergic control, JOB switching is also...none
4 m 419,92 €*/499,70 €**
8 m 470,97 €*/560,45 €**
-
WK50mm² Ø 13 mm 350A/60% 4m/KWorkpiece lead with clamp 16 mm² - 50 mm²none
170 A / 60 %, 16 mm² 45,60 €*/54,26 €**
290 A / 60 %, 35 mm² 62,70 €*/74,61 €**
350 A / 60 %, 50 mm² 87,00 €*/103,53 €**
-
GH 2x1/4'' 2mEquipped with plastic nuts on both sides for tool-free assembly Gas type: Argon/H2/CO2 (forming gas)none
2 m 21,10 €*/25,11 €**
3 m 30,10 €*/35,82 €**
5 m 41,00 €*/48,79 €**
10 m 61,40 €*/73,07 €**
GH 2x1/4'' 15m 88,90 €*/105,79 €**
-
Proreg Ar/CO2 230bar 15l DPressure regulator with manometernone
15 l 73,50 €*/87,47 €**
30 l 73,50 €*/87,47 €**
-
OW CEE 16A/400VMains plug, factory fitting (no retrofitting)none
OW CEE 16A/400V 34,80 €*/41,41 €**
Control
- One-knob operation
- Welding sequence selection and parameter setting using click wheel or conventional operation with sequence buttons (back/forward)
- Expert menu for advanced welding parameter settings
- Welding sequence parameter setting
- Start, welding, secondary and end current
- Up-slope/down-slope time
- Gas pre- and post-flow time
- Electrode diameter
Welding process | TIG |
activArc | |
spotArc | |
spotmatic | |
TIG AC | |
MMA | |
Operating modes | Non-latched |
Latched | |
AC functions | AC sine |
AC trapezoidal | |
AC rectangle | |
AC balance | |
Ignition options | HF |
Liftarc | |
Pulse type | Average value pulsing |
Pulse frequency | |
Parameters in display | Welding current |
Welding voltage | |
Welding parameters | |
Welding power | |
Functions | Gas pre- and post-flow time |
Up-slope/down-slope time | |
Start, welding, secondary and end current | |
Pulse and break current | |
Electrode diameter | |
Pulse frequency and balance | |
MMA functions | Hotstart |
Arcforce | |
Antistick | |
AC electrode welding | |
Average value pulsing | |
Frequency pulse welding |
Technical data
Setting range for welding current | 5 A - 300 A |
Duty cycle 40 °C | 300 A / 35 % |
260 A / 60 % | |
210 A / 100 % | |
Open circuit voltage | 63 V |
Mains voltage (ex works) | 3 x 400 V |
Mains tolerances (ex works) | -25 % up to +20 % |
Mains frequency | 50 Hz / 60 Hz |
Efficiency | 84 % |
Protection classification | IP23 |
Test mark | |
EMC class | A |
Dimensions (L x B x H) | 539 mm x 210 mm x 415 mm |
21.2 inch x 8.3 inch x 16.3 inch | |
Weight | 22.6 kg / 49.8 lbs |
Standards | IEC 60974-1, -3 and -10 CL.A |
Documents
Accessories
Show all
Components and accessories
Workshop equipment
Xnet Welding Management System
Welding torches
Oxy-acetylene equipment and gas supply