View shopping cart
0 Products  
0,00 €    

0save cart

View wish list
0 Products  

0add wishlist

Go to product comparison
0 Products  

0add compare

TIG welding machines

Tetrix XQ 600 puls DC W EX 8P

Sample image, your configuration may differ.

The price shown includes the following components:

  • TIG DC pulse welding machine including all characteristics and functions, demodular
  • “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l
  • TIG welding torch, Up/Down, water-cooled, 4 m
  • Workpiece lead with clamp, 550 A / 60 %, 95 mm²
  • Gas hose, 2 m
  • Pressure regulator with manometer, 15 l
  • Mains plug, assembled,
Control
Update!

Description

  • Energy-saving thanks to high efficiency and standby function
  • TIG DC inverter welding machine of the latest generation
  • Expert 3.0 control with 7” high-resolution graphic display (no touchscreen) with plain text display for selecting all parameters and control customisation
  • Welding procedures and functions
  • TIG DC and TIG pulse
  • activArc® and spotArc®
  • MMA, MMA pulse, MMA cel, MMA cel pulse
  • Your benefits
  • Connection capability for remote control and function torch
  • flexFit casing system: Many accessory parts and options can be fixed to the welding machine using conventional slot nuts
  • LED information bar: Indicates the current operating status
  • Splash-proof as per IP23
  • Temperature- and speed-controlled cooling fan – reduced contamination and less noise emissions as fan only runs when needed
  • Simple, tool-free reversal of the welding polarity
  • Optional network connectivity with ewm Xnet software via LAN or WiFi gateway
  • Earth fault monitoring (PE protection)
  • PC interface for PC300 XQ software
  • The high 1500 W cooling capacity, high-performance centrifugal pump and 8-litre coolant tank make for excellent torch cooling, resulting in cost savings on consumables
Configuration
  • 090-005673-00000 Tetrix XQ 600 puls DC TIG DC pulse welding machine including all characteristics and functions, demodular
  • 092-003303-00000 OW F06W Water cooling
  • 092-003316-00000 OW F06R1 Wheel kit with single cylinder mount
  • 092-003349-00000 OW MCord 6 mm² 5m Mains connection lead, 5 m
  • 092-004338-00000 OW Expert 3.0 Expert 3.0 control
  • 092-004345-00000 OW 8POL Welding torch control cable connection: Burndy, 8-pole
  • 092-004376-00000 OW NDGC F.06 No gas control
  • 092-004377-00000 OW N+1/7Pol BUS (F.06) No second 7-pole bus plug

Other options are possible on request.

92404
18794
91641
6105
124396
8776

Welding site equipment

  • Please choose all necessary components to complete your system here.
  • Tetrix XQ 600 puls DC W EX 8P
    TIG DC pulse welding machine including all characteristics and functions, demodular
    Tetrix XQ 600 puls DC W EX 8P.  Energy-saving thanks to high efficiency and standby function  3 A - 600 A
    090-005673-00004 12.001,70 €* / 14.282,02 €**
  • blueCool -10 5 l
    Coolant for water-cooled welding machines and cooling units
    blueCool -10.  Coolant for water-cooled welding machines and cooling units
    none
    5 l 30,75 €*/36,59 €**
    25 l 136,25 €*/162,14 €**
  • TIG 450SC GRIP WD 8P U/D HFL 4m
    Water-cooled TIG welding torch with a highly flexible hose package (high-flex leather) SuperCool / high-performance...
    TIG 450SC GRIP WD U/D HFL.  Water-cooled TIG welding torch with a highly flexible hose package (high-flex leather)  SuperCool / high-performance torch version  Duty cycle DC-: 450 A / 100 %
    none
    4 m 561,63 €*/668,34 €**
    8 m 677,31 €*/806,00 €**
  • WK95mm² Ø 13 mm 550A/60% 4m/Z
    Workpiece lead with clamp 70 mm² - 95 mm²
    WK 4M/Z Ø 13 mm.  Workpiece lead with clamp  70 mm² - 95 mm²
    none
    450 A / 60 %, 70 mm² 140,00 €*/166,60 €**
    550 A / 60 %, 95 mm² 166,00 €*/197,54 €**
  • GH 2x1/4'' 2m
    Equipped with plastic nuts on both sides for tool-free assembly Gas type: Argon/H2/CO2 (forming gas)
    Gas hose.  Equipped with plastic nuts on both sides for tool-free assembly  Gas type: Argon/H2/CO2 (forming gas)
    none
    2 m 21,10 €*/25,11 €**
    3 m 30,10 €*/35,82 €**
    5 m 41,00 €*/48,79 €**
    10 m 61,40 €*/73,07 €**
    GH 2x1/4'' 15m 88,90 €*/105,79 €**
  • Proreg Ar/CO2 230bar 15l D
    Pressure regulator with manometer
    Proreg Ar/CO2 230bar.  Pressure regulator with manometer
    none
    15 l 73,50 €*/87,47 €**
    30 l 73,50 €*/87,47 €**
  • OW CEE 32A
    Mains plug, factory fitting (no retrofitting)
    OW CEE32A.  Mains plug, factory fitting (no retrofitting)
    none
    OW CEE 32A 38,10 €*/45,34 €**
  • Order selected
    Place the welding machine and all selected products into the shopping cart with just one click.
    Buy now

Control

OW Expert 3.0

OW Expert 3.0 LAN - Intuitive operation with customisation options: The new Expert XQ 3.0 control allows you to set the parameters of your welding task more flexibly than ever before.  
  • Preconfigured languages for the user menu: CZ / DA / DE / EN / ES / FI / FR / HR / HU / IT / NL / PL / PT / RO / RU / SE / SL / TR
  • Now anything’s possible
  • 7” high-resolution graphic display with plain text display (no touchscreen)
  • Five favourites buttons
  • Xbutton for individual access authorisation
  • USB interface for software updates and JOB copying
  • Click wheel for convenient operation with welder’s gloves
  • Reliable push-button operation
  • Customisable to your individual requirements
  • Direct access to all main functions
  • All parameters at a glance
  • Colour screen and graphical support for setting parameters
  • Graphic adjustment of all parameters in the flow diagram GRAFISCHE ANPASSUNG.TIF
  • Visual support for parameter setting PULS_EINSTELLUNGEN_4C.TIF
  • All key functions can be accessed without submenus directly from the home screen Q-INFO_EINSTIG_ECKTASTE_A_4C.TIF
  • Easy-to-understand, illustrated instructions and quick-access menus BALLING_4C.TIF
Welding processDC TIG
TIG AC
MMA DC
MMA AC
E-Hand cel
Operating modesNon-latched
Latched
spotArc
spotmatic
AC functionsAC tungsten balling
AC sine
AC trapezoidal
AC rectangle
AC advanced waveform setting (positive/negative half-wave can be set separately)
AC balance
AC amplitude balance
AC frequency: 30 Hz to 300 Hz
Automatic AC frequency
AC commutation optimisation for highest arc stability
Ignition optionsHF
Liftarc
Pulse typeAverage value pulsing (0.2 Hz–20 kHz) incl. waveform setting (soft, middle, hard)
Thermal pulsing (time pulsing)
Automatic pulsing incl. waveform setting (soft, middle, hard)
AC special
FunctionsactivArc
Automatic gas post-flow function
Cable resistance alignment
MMA functionsHotstart
Arcforce
Antistick
Average value pulsing
Job functionsNumber of freely definable Jobs 100 TIG, 8 MMA, 8 MMA Cel
JOB manager (JOBs can be copied and reset individually, save and load on USB)
NoteAC functions only available with AC/DC devices!

Technical data

VersionTetrix XQ 600 puls DC W EX 8P
Setting range for welding current3 A - 600 A
Duty cycle 40 °C600 A / 40 %
550 A / 60 %
470 A / 100 %
Open circuit voltage82 V
Mains voltage (ex works)3 x 380 V - 400 V
Mains voltage (possible)3 x 440 V - 460 V
Mains voltage (possible)3 x 480 V - 500 V
Mains tolerances (ex works)-25 %
Netztoleranzen (ab Werk) bei 110 V - 120 V up to +20 %
Mains frequency50 Hz / 60 Hz
Recommended generator power35.4 kVA
Efficiency90 %
Power consumption Pi27 W
Cooling capacity at 1 l/min.1500 W
Pump pressure3.5 bar
Tank capacity8 l
Protection classificationIP23
Test mark
EMC classA
Dimensions (L x B x H)1152 mm x 686 mm x 976 mm
45.4 inch x 27 inch x 38.4 inch
Weight128.5 kg / 283.3 lbs
StandardsIEC 60974-1, -2, -3 and -10 CL.A
Note
  • The mains voltage can be adapted by connecting a plug with a different operating voltage. The voltage may only be adjusted by a qualified electrician in accordance with the respective national legislation and regulations.

Documents

Manuals
 de Betriebsanleitung
Tetrix XQ 350 puls DC
Tetrix XQ 400 puls DC
Tetrix XQ 500 puls DC
Tetrix XQ 600 puls DC
 de Betriebsanleitung
L2.00 - DC Expert 3.0 TIG
L2.00 - AC/DC Expert 3.0 TIG
 en Manual
Tetrix XQ 350 puls DC
Tetrix XQ 400 puls DC
Tetrix XQ 500 puls DC
Tetrix XQ 600 puls DC
 en Manual
L2.00 - DC Expert 3.0 TIG
L2.00 - AC/DC Expert 3.0 TIG
 fr Notice d´utilisation
Tetrix XQ 350 puls DC
Tetrix XQ 400 puls DC
Tetrix XQ 500 puls DC
Tetrix XQ 600 puls DC
 fr Notice d´utilisation
L2.00 - DC Expert 3.0 TIG
L2.00 - AC/DC Expert 3.0 TIG
 it Manuale d´uso
Tetrix XQ 350 puls DC
Tetrix XQ 400 puls DC
Tetrix XQ 500 puls DC
Tetrix XQ 600 puls DC
 it Manuale d´uso
L2.00 - DC Expert 3.0 TIG
L2.00 - AC/DC Expert 3.0 TIG
 es Manual de instrucciones
Tetrix XQ 350 puls DC
Tetrix XQ 400 puls DC
Tetrix XQ 500 puls DC
Tetrix XQ 600 puls DC
 es Manual de instrucciones
L2.00 - DC Expert 3.0 TIG
L2.00 - AC/DC Expert 3.0 TIG
 nl Bedieningshandleiding
Tetrix XQ 350 puls DC
Tetrix XQ 400 puls DC
Tetrix XQ 500 puls DC
Tetrix XQ 600 puls DC
 nl Bedieningshandleiding
L2.00 - DC Expert 3.0 TIG
L2.00 - AC/DC Expert 3.0 TIG
 sw Bruksanvisning
Tetrix XQ 350 puls DC
Tetrix XQ 400 puls DC
Tetrix XQ 500 puls DC
Tetrix XQ 600 puls DC
 sw Bruksanvisning
L2.00 - DC Expert 3.0 TIG
L2.00 - AC/DC Expert 3.0 TIG
 pl Instrukcja obsługi
Tetrix XQ 350 puls DC
Tetrix XQ 400 puls DC
Tetrix XQ 500 puls DC
Tetrix XQ 600 puls DC
 pl Instrukcja obsługi
L2.00 - DC Expert 3.0 TIG
L2.00 - AC/DC Expert 3.0 TIG
 ru Руководство по эксплуатации
Tetrix XQ 350 puls DC
Tetrix XQ 400 puls DC
Tetrix XQ 500 puls DC
Tetrix XQ 600 puls DC
 ru Руководство по эксплуатации
L2.00 - DC Expert 3.0 TIG
L2.00 - AC/DC Expert 3.0 TIG
 ro Instrucţiuni de utilizare
Tetrix XQ 350 puls DC
Tetrix XQ 400 puls DC
Tetrix XQ 500 puls DC
Tetrix XQ 600 puls DC
 ro Instrucţiuni de utilizare
L2.00 - DC Expert 3.0 TIG
L2.00 - AC/DC Expert 3.0 TIG
 hu Üzemeltetési utasítás
Tetrix XQ 350 puls DC
Tetrix XQ 400 puls DC
Tetrix XQ 500 puls DC
Tetrix XQ 600 puls DC
 hu Üzemeltetési utasítás
L2.00 - DC Expert 3.0 TIG
L2.00 - AC/DC Expert 3.0 TIG
 cs Návody k obsluze
Tetrix XQ 350 puls DC
Tetrix XQ 400 puls DC
Tetrix XQ 500 puls DC
Tetrix XQ 600 puls DC
 cs Návody k obsluze
L2.00 - DC Expert 3.0 TIG
L2.00 - AC/DC Expert 3.0 TIG
 tr Kullanim kilavuzu
Tetrix XQ 350 puls DC
Tetrix XQ 400 puls DC
Tetrix XQ 500 puls DC
Tetrix XQ 600 puls DC
 tr Kullanim kilavuzu
L2.00 - DC Expert 3.0 TIG
L2.00 - AC/DC Expert 3.0 TIG
 fi Käyttöohje
Tetrix XQ 350 puls DC
Tetrix XQ 400 puls DC
Tetrix XQ 500 puls DC
Tetrix XQ 600 puls DC
 fi Käyttöohje
L2.00 - DC Expert 3.0 TIG
L2.00 - AC/DC Expert 3.0 TIG
 pt Manual de instruções
Tetrix XQ 350 puls DC
Tetrix XQ 400 puls DC
Tetrix XQ 500 puls DC
Tetrix XQ 600 puls DC
 pt Manual de instruções
L2.00 - DC Expert 3.0 TIG
L2.00 - AC/DC Expert 3.0 TIG
 sl Navodila za uporabo
L2.00 - DC Expert 3.0 TIG
L2.00 - AC/DC Expert 3.0 TIG
Show more language versions...

Accessories

Show all
Components and accessories
Workshop equipment
Xnet Welding Management System
Welding filler metals
Welding torches
Oxy-acetylene equipment and gas supply
An error occurred
Successfully completed
current mapping: product