tigSpeed continuous drive 45 hotwire
Description
- TIG cold wire and hot wire welding
- High process reliability, reproducible welding results and straightforward handling
- Heat supply to the wire for improved deposition rate and an even lower risk of weld errors
- Perfect weld appearance, no weld spatters
- Can be used with any TIG welding machine
- Workpiece lead to connect the hot wire current is included in the supply package
Control
- Parameter readout and setting of absolute values on the digital displays – repeat-accurate and reproducible (m/min or Ipm)
- 15 individually definable welding programs can be saved
Welding process | tigSpeed continuous |
tigSpeed oscillation | |
tigSpeed Superpuls | |
Availability of welding procedures may vary depending on the machine type! | |
Operating modes | Manual non-latched |
Manual latched | |
Automatic non-latched | |
Automatic latched | |
Ignition options | HF |
Liftarc | |
Parameters in display | Wire feed speed |
Forward/backward motion in hertz | |
Program number |
Technical data
Setting range for welding current | 40 A - 180 A |
Duty cycle 40 °C | 180 A / 35 % |
150 A / 60 % | |
130 A / 100 % | |
Mains voltage | 1 x 230 V |
Tolerances | -40 % up to +15 % |
Mains frequency | 50 Hz / 60 Hz |
Wire feed speed | 0.3 m/min - 15 m/min |
11.811 ipm - 590.552 ipm | |
Factory-installed roll equipment | 1,0 + 1,2 mm / Steel |
Spool diameter | D200/D300 |
Protection classification | IP23 |
Test mark | |
EMC class | A |
Dimensions (L x B x H) | 625 mm x 377 mm x 531 mm |
24.6 inch x 14.8 inch x 20.9 inch | |
Standards | IEC 60974-1, -5 and -10 CL.A |
Documents
Accessories
-
ON AL D13/27Cap for load socketsfrom 4,15 €* / 4,94 €** / Pcs.
-
URUE AL 4ZR4R 0.8+1.0 SF
0.8 mm - 2.4 mm
from 171,00 €* / 203,49 €** / VE -
URUE ROE 2DR4R 0.8/0.9+0.8/0.9 SF
0.8 mm - 0.9 mm - 2.8 mm
from 157,50 €* / 187,43 €** / VE -
comfyTig 18-1 HW 12P 3m flex
Water cooled TIG welding torch with a separate cold and hot wire feed
Hardly any difference in operation when switching from MIG/MAG to cold or hot wire welding
Duty cycle DC-: 300 A / 100 %
from 1.224,00 €* / 1.456,56 €** / Pcs. -
ON WAK tigSpeed
With wheel assembly kit with strain relief
from 203,00 €* / 241,57 €** / Pcs. -
ON AS SR tigSpeed
Strain relief for tigSpeed
from 52,50 €* / 62,48 €** / Pcs. -
ON PS F.06 + tigSpeed/TG.10
Cross arm for housing a tigSpeed wire feeder
from 245,00 €* / 291,55 €** / Pcs. -
tigSpeed 95QMM W AW 5POL 2m
Intermediate hose package, water-cooled, filler wire, incl. strain relief
Cross-section: 95 mm²
from 513,00 €* / 610,47 €** / Pcs. -
RTG U/D 12POL 5m
Remote control for tigSpeed system
from 349,00 €* / 415,31 €** / Pcs. -
ADAP ZSP 5POLIG/500MM
Adapter for tigSpeed intermediate hose package for connection to equipment from other manufacturers
from 53,80 €* / 64,02 €** / Pcs.